Design & Integration Services

Value Added Distribution (VAD)

Power, LED, Communication

 
 

The ARMS POWER-RACK Series T is a complete power supply system for Telecommunications Equipment utilizing Power-One Modules. 48 Volt and 24 Volt systems are available from 500 Watts up to as much as 7,500 Watts. The system is mounted in a high quality Aluminum 19” equipment rack. DC-DC Converter Subracks are available to provide voltages other than the chargers output. DC-AC Inverters from 125 Watts on up to 20 KW in 19” subracks are available for AC loads requiring backup.

Power Rack Data Sheet
 
 

Portable Load Bank

 

  • Operating Voltage: 12-16 Volts DC
  • Operating Current: 1-19 Amps
  • Max Power: 300 Watts
  • Four 10 Ohm and Four 5 Ohm Selectable Loads in Parallel
  • Test Points For Voltage and Amperage
  • Digital Volt and Amp Meters Optional (Part Number PLB12-300W-DC-VAM)
  • Resistive Loads Cooled by Heat Sink and Fan
  • 1/4-24 Stud Terminals
  • Power “ON” Indicator
  • 25 Amp ON/OFF Circuit Breaker
  • Dimensions 9” x 8.125” x 12” (HWD)
  • Weight = 9 Pounds

Portable Load Bank Data Sheet

 
 
 

ARMS Power Supply (APS) is a switch-mode power supply or battery charger for small to medium power applications. Performance verses price is exceptional! This compact source of reliable power easily fits into your system without taking up excessive real estate.

The APS has been built in several different versions, but all have the same building blocks. ARMS can easily accommodate multiple voltages with different power requirements all with the building block components that meet the quality and performance expectations of the APS design team and our valued customers.

APS Data Sheet
 
   

Xscend DC Power System

Xxcend Data Sheet

   
   

ARMS Integrity-One UPS System

Integrity-One Data Sheet

Exeltech Inverter Data Sheet

   
 

ARMS BDP / BDW
Circuit Breakers:
Each Battery Disconnect utilizes an Airpax magnetic circuit breaker. This breaker meets UL and IEC specifications. The breaker may be equipped with an optional auxiliary switch used for the alarm.

Rack Mount Panels:
Rack-mount battery disconnects are assembled on a standard 3U x 19” or 23” aluminum panel. Contact the factory if a different size is desired.

Wall Mount Enclosures:
Breakers are mounted in a steel enclosure for wallmount applications. The enclosures are NEMA-4 boxes finished in an ANSI-61 Gray. The breakers are equipped with a compression type lug and accepts up to a 2-gauge wire.

Battery Disconnect Data Sheet